RECRON 3S FIBRES FOR CONCRETE
Recron 3s Fibres are Engineered Micro Fibre with a unique “Triangular” Cross-section, used in Secondary Reinforcement of Concrete. It complements Structural Steel in enhancing Concrete’s resistanceto Shrinkage Cracking and with the desired improvement in abrasion and impact Strenghts
Recron 3s Fibres are manufactured in an ISO 9001:2000 facility for use in Concrete as a “Secondary Reinforcement” at a rate of dosage varying from 0.1% to 0.4%by volume (0.9Kgs/Cu.M – 3.60Kgs/Cu.M). Fibre comply with ASTM C 1116, Type 111 Fibre Reinforced Cncrete.
FEATURES & BENEFITS
- Improves Resitances to Plastic & Drying Shrinkage Cracking
- Inhibits growth of Cracks-bridges Micro-Cracks and provides stability to Concrete
- Improves Flexural Toughness / Increases Split Tensile Strengh
- Enhances Abrasion Resistance & increases Energy Absorption of Concrete thereby improving Impact Resistance
- Acts as a Plumping aid in making Concrete more homogenous
- Reduces Surface Water Absorptin / Permeability in Concrete
- Improves Durability and enhances Longevity of Concrete/ Structure
| Sr.No | Properties | Units | POLYESTER | POLYPROPYLENE | Remarks |
|---|---|---|---|---|---|
|
1 |
Shape |
|
Triangular |
Triangular |
|
|
2 |
Cut Lenght |
mm |
3/4.8/6/12/18/24 |
3/4.8/6/12/18/24 |
+/-1mm Project Specific customized lengths can be produced on request |
|
3 |
Effective Diameter |
microns |
20-40 |
25-40 |
|
|
4 |
Specific Gravity |
|
1.34-1.39 |
0.90-0.91 |
|
|
5 |
Melting Point |
Deg. C |
250-265 |
160-165 |
|
|
6 |
Tensile Strength |
Gpd |
4-6 * |
4-6 * |
-Estimated tensile strength in Mpa 4-6
*Polyester 480-730
Polypropylene 320-490 |
|
7 |
Elongation |
% |
20-60 |
60-90 |
Initial Modulus |
|
8 |
Young’s Modulus |
Mpa |
> 5000 |
> 4000 |
Test done as per AC |
|
9 |
Alkaline Stability |
|
Very Good |
Very Good |
32 Standers |
Recron-3s Supplier in Chennai
Recron-3s Supplier in Chennai Our hot selling products is Reliance Recron 3s – New Engineered fibre for concrete and plastering solutions.